Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Philip Le Riche-

Modifica approvata da Philip Le Riche

Prima di
Dopo il
Invariato

Righe Passo

[* black] The image sensor can be inspected or replaced without further disassembly of the lens. However, any dust or fingermarks may have a major impact on image quality and so it should preferably be left alone.
[* black] With a small craft knife, scrape away the locking glue from the 3 screws securing the image sensor plate to the back of the lens. Take care to remove any loose fragments of glue which might fall into the lens.
[* black] Remove the 3 screws. RenainingRemaining glue will make these stiff - take care not to burr the heads. Gently ease the image sensor away, keeping the lens face-down on the bench.
[* black]
Put the sensor aside, safe from dust contamination, such as in a self-sealing polythene bag.
[* black] Remove the 3 screws. RenainingRemaining glue will make these stiff - take care not to burr the heads. Gently ease the image sensor away, keeping the lens face-down on the bench.
[* black]
Put the sensor aside, safe from dust contamination, such as in a self-sealing polythene bag.