Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Walter Galan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.
[* black] Attach a suction cup near the upper left corner of the glass display panel.
[* black] Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.
[* icon_note] Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto