Aggiusta le tue cose Community Store

Modifiche al passo #31

Modifica di Geoff Wacker —

Modifica approvata da Geoff Wacker

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.
-[* black] Carefully insert a guitar pick under the ribbon cable near the Lighting connector housing.
-[* black] Slide the guitar pick toward the logic board, but stop half an inch from the bend in the cable.
- [* black] Continuing farther along the ribbon cable risks cutting it.
+[* black] Carefully insert an opening pick under the ribbon cable near the Lighting connector housing.
+[* black] Slide the opening pick toward the logic board, but stop half an inch from the bend in the cable.
+ [* icon_caution] Continuing farther along the ribbon cable risks cutting it.