Modifiche al passo #31
Modifica di Sam Goldheart —
Modifica approvata da Sam Goldheart
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gently to see if the adhesive is softened. If not, reheat the iOpener and reapply it to the back of the rear case. |
|---|---|
| + | [* black] Carefully insert a guitar pick under the Lightning connector ribbon cable. |
| + | [* black] Slide the guitar pick toward the logic board, but stop half an inch from the bend in the cable.. |
| + | [* black] Continuing farther along the ribbon cable risks cutting it. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto