Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

-[title] Cleaning the contacts on the printer
-[* icon_note] If this is area is not cleaned, your printer may crash again with a ***Ink System Failure*** error. This error does not jeopardize the calibration data, but it will persistently crash like this until the contacts are cleaned up on both the printhead and contact strip within the printer.
-[* black] If the contacts in the printer are dirty, clean these before reinstalling the printhead.
+[title] Clean the contacts in the printer
+[* icon_note] If this is area is not cleaned, your printer may give you a ***Ink System Failure*** error. This error does not jeopardize the calibration data if the printhead is making good electrical contact, but it is likely to crash very frequently.
+[* black] To avoid ***Ink System Failure*** crashes, inspect the electrical contacts in the printer. If you find these have ink on them, wipe the contacts in the printer down with a alcohol covered napkin or eyeglass cleaner wipes. Do this BEFORE reinstalling the printhead.