Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il

Righe Passo

[title] Test the printer
[* icon_caution] ***If any ink cartridge is low, replace it for this test. The ink levels must be good for accuracy.***
-[* icon_reminder] If your printer still has an issue, it is likely a printhead fault. Try cleaning the printhead with the built in tool and see if the problem clears up. If it does not, replace the printer since it can be a printhead or printer fault and printheads are ~$80.
+[* icon_caution] If your printer still has an issue, it is likely a bad printhead. Try using the built-in cleaning utility; if it does not work it's generally better to replace the printer since the printhead is ~$80 and may not resolve the issue.
[* icon_note] If you have a 5 color printer (K/PK/C/M/Y), use the Photo printing mode. This will allow you to test Photo Black.
[* black] After replacing the printhead, test your printer again. Use the same settings as the before test and see if the results have improved.