Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Test the printer
-[* icon_caution] ***Ink levels are very important for this test. If any ink cartridge(s) currently installed are low, these cartridges should be replaced.***
-[* icon_reminder] If you have a 5 color printer (K/PK/C/M/Y), use the Photo printing mode. This will allow you to test Photo Black.
-[* icon_note] If you are still having problems, the printhead likely has other problems. To rule this out, try to clean the printhead once and see if the problem clears up. ***Tip: If this condition does not clear up after two tries, a new printhead is ~$80. It's often cheaper to buy a new printer then a new printhead.***
+[* icon_caution] ***If any ink cartridge is low, replace it for this test. The ink levels must be good for accuracy.***
+[* icon_reminder] If your printer still has an issue, it is likely a printhead fault. Try cleaning the printhead with the built in tool and see if the problem clears up. If it does not, replace the printer since it can be a printhead or printer fault and printheads are ~$80.
+[* icon_note] If you have a 5 color printer (K/PK/C/M/Y), use the Photo printing mode. This will allow you to test Photo Black.
[* black] After replacing the printhead, test your printer again. Use the same settings as the before test and see if the results have improved.