Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Test the printer
-[* icon_caution] ***Ink levels are very important for this test. If any ink cartridge(s) currently installed are low, you should replace these cartridges now to make sure these results are accurate.***
-[* icon_reminder] If you have a 5 color printer (K/PK/C/M/Y), this test should be done in the photo printing mode to test Photo Black. Photo Black is not used in any other mode.
-[* icon_note] If you have any print quality problems, run a printhead cleaning to get a sufficient amount of ink back in the system. ***Tip: If you have to do this more then two times, your printhead may be damaged. These are usually ~$80, so it's typically cheaper to buy a new printer.***
-[* black] After replacing the printhead, run a print test to see if the printer works correctly. Use the same settings as you used for the reference image and compare the before and after results.
+[* icon_caution] ***Ink levels are very important for this test. If any ink cartridge(s) currently installed are low, these cartridges should be replaced.***
+[* icon_reminder] If you have a 5 color printer (K/PK/C/M/Y), use the Photo printing mode. This will allow you to test Photo Black.
+[* icon_note] If you are still having problems, the printhead likely has other problems. To rule this out, try to clean the printhead once and see if the problem clears up. ***Tip: If this condition does not clear up after two tries, a new printhead is ~$80. It's often cheaper to buy a new printer then a new printhead.***
+[* black] After replacing the printhead, test your printer again. Use the same settings as the before test and see if the results have improved.