Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Bypassing the "first use" initialization setup
[* black] To remove the printhead from the printer, open the scanner lid and let it come to the stopping point in the printer. See [guide|32772|this] if you need a dedicated guide on removal. Once you do this, follow the steps on getting around the first use alignment and ink waste. This printer wastes 1/4 of any Retail ink you install if this has to be repeated.
-[* red] Unplug the printer with the head installed ***first*** to ensure you do not lose the alignment. Once you unplug the printer, remove the printhead. ***DO NOT DO THIS UNTIL THE POWER IS CUT OFF! FAILURE TO DO THIS WILL CAUSE THE ALIGNMENT TO GET LOST!***
+[* red] Unplug the printer with the head installed ***first*** to ensure you do not lose the alignment. Once you unplug the printer, remove the printhead. ***DO NOT DO THIS UNTIL THE POWER IS CUT OFF! FAILURE TO DO THIS WILL ERASE THE ALIGNMENT FROM THE PRINTER!***
[* black] To remove the printhead: Lift the handle that holds the printhead in up, and pull up to remove it from the printer.