Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Bypassing the printhead initalization
[* black] To remove the printhead from the printer, open the scanner lid, and let it come to the stopping point in the printer.
[* red] Lift the handle holding the printhead in up, as this will release the printhead.
-[* black] Lift up on the printhead, and it should be removed from the printer. ***Unplug the printer and leave it as found.***
+[* black] Lift up on the printhead, and it should be removed from the printer.
+[* black] ***Unplug the printer and leave it as found. If you screw this part up, you will likely lose your alignment settings!***
[* icon_reminder] Let me say it one more time-CLOSING THE PRINTER MAY CAUSE IT TO SEE YOU REMOVED THE PRINTHEAD! Leave it open to retain the printhead calibration. If you find the printer closed, open it up and make sure it does not get power.