Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

-[title] Bypassing the "first use" initialization setup
+[title] Preserving your printhead calibration
[* icon_caution] ***Unplug the printer before doing ANYTHING. If you do not do this you risk losing the calibration data.***
[* black] ***If you need clearer instructions, follow [guide|32772|this guide] for additional instructions.***
-[* black] With the ink cartridges removed from the printer, it is time to remove the printhead. ***VERIFY the printer is unplugged a second time before doing anything first.***
-[* black] With the power being checked twice, it is time to remove the printhead. Lift the locking latch up first. Once you do this, the printhead is ready to be removed.
-[* black] Once the printhead is unlocked, lift the printhead up from the top part. You will want to handle this part from the top where the ink colors are indicated. ***Do not touch the contacts or nozzle once the printhead is removed. It is also ADVISED to leave the printer's scanner unit open.***
+[* black] With the ink cartridges removed from the printer, it is time to remove the printhead. ***Important: Before removing the printhead, VERIFY the printer is unplugged before removing anything.***
+[* black] With the printer being unplugged and verified twice, remove the printhead. Lift the locking latch on the printhead carrier up. Once this is unlocked, the printhead can be removed.
+[* black] Once the printhead is unlocked, remove the printhead. Remove the printhead by grabbing it as shown. ***Important: DO NOT touch the contacts or nozzles on the printhead. This can damage the printhead.***
+[* black] Leave the scanner lid open to avoid confusion about if a printhead is installed.