Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Bypassing the "first use" initialization setup
[* icon_caution] ***Unplug the printer before doing ANYTHING. If you do not do this you risk losing the calibration data.***
[* black] ***If you need clearer instructions, follow [guide|32772|this guide] for additional instructions.***
[* black] With the ink cartridges removed from the printer, it is time to remove the printhead. ***VERIFY the printer is unplugged a second time before doing anything first.***
[* black] With the power being checked twice, it is time to remove the printhead. Lift the locking latch up first. Once you do this, the printhead is ready to be removed.
-[* black] Once the printhead is unlocked, lift the printhead up from the top part. You will want to handle this part from the top where the ink colors are indicated. ***Do not touch the contacts or nozzle once the printhead is removed.***
+[* black] Once the printhead is unlocked, lift the printhead up from the top part. You will want to handle this part from the top where the ink colors are indicated. ***Do not touch the contacts or nozzle once the printhead is removed. It is also ADVISED to leave the printer's scanner unit open.***