Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Bypassing the "first use" initialization setup
-[* black] ***Unplug the printer before doing ANYTHING. If you do not do this you risk losing the calibration data.***
-[* black] Remove the printhead from the printer. To do this, open the lid and remove the ink tanks. Once the ink is removed, lift the latch holding the printhead up, as shown. Remove the printhead once this is done. ***Note: If you need clearer instructions, follow [guide|32772|this guide] for additional instructions.***
+[* icon_caution] ***Unplug the printer before doing ANYTHING. If you do not do this you risk losing the calibration data.***
+[* black] ***If you need clearer instructions, follow [guide|32772|this guide] for additional instructions.***
+[* black] With the ink cartridges removed from the printer, it is time to remove the printhead. ***VERIFY the printer is unplugged a second time before doing anything first.***
+[* black] With the power being checked twice, it is time to remove the printhead. Lift the locking latch up first. Once you do this, the printhead is ready to be removed.
+[* black] Once the printhead is unlocked, lift the printhead up from the top part. You will want to handle this part from the top where the ink colors are indicated. ***Do not touch the contacts or nozzle once the printhead is removed.***