Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Elohino Theodore-

Modifica rifiutata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

[title] Bypassing the "first use" initialization setup
-[* black] To remove the printhead from the printer, open the scanner lid and let it come to the stopping point in the printer. See [guide|32772|this] if you need a dedicated guide on removal. Once you do this, follow the steps on getting around the first use alignment and ink waste. This printer wastes 1/4 of any Retail ink you install if this has to be repeated.
+[* black] To remove the printhead from the printer, open the scanner lid and let it come to the stopping point in the printer. See [guide|32772|this] if you need a dedicated guide on removal. Once you do this, follow the steps on getting around the first use alignment and ink waste. This printer wastes 1/4 of any Retail ink you install if this has to be repeated./***Reword***
[* red] Unplug the printer with the head installed ***first*** to ensure you do not lose the alignment. Once you unplug the printer, remove the printhead. ***DO NOT DO THIS UNTIL THE POWER IS CUT OFF! FAILURE TO DO THIS WILL ERASE THE ALIGNMENT FROM THE PRINTER!***
-[* black] To remove the printhead: Lift the handle that holds the printhead in up, and pull up to remove it from the printer.
+[* black] To remove the printhead: Lift the handle that holds the printhead in up, and pull up to remove it from the printer./***To remove the printhead: lift the handle that holds the printhead up. Pull up to remove the printhead from the printer.***