Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

+[* black] To remove the printhead from the printer, open the scanner lid, and let it come to the stopping point in the printer.
+[* red] Lift the handle holding the printhead in up, as this will release the printhead.
+[* black] Lift up on the printhead, and it should be removed from the printer.
+[* icon_note] This is also a good time to check for ink on the electrical contacts, as ink tends to build up there over the years. If you see any, clean it up while you are back here.
+[* icon_reminder] ***DO NOT close the lid yet-go to the next step as this is important to bypass the new printhead/setup procedure!***