Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Getting hot water
-[* black] Go to a source where you can get hot water, and prepare the water for heating. Hot water is used to clean the head quickly and improve the odds it will clean the printer out completely. You can use any source of water, but a coffee maker may not be your best choice.
-[* icon_note] Use of a coffee maker isn't "bad", but you should do some additional filtering first to get the coffee bits out of the water that comes out. This can be done with a strainer or multiple batches without a coffee pod and the carrier, in the case of the Keurig coffee makers. Some other sources could be boiled over a stove or microwaved, for example.
+[* black] Go to a source where you can get hot water, and prepare the water for heating. Hot water is used to clean the head quickly and improve the odds of recovering the printer. ***Note: While water from a source like a coffee maker works, it may not be the best source. Distilled water is recommended, if possible.***
+[* icon_note] If a source like a coffee maker is used, it is recommended that a filer be installed before getting water for the cleaning. It will help the quality of the water, but it still is not a good source if you have better options.