Salta al contenuto principale

Modifiche al passo #8

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[* black] Dry the printhead nozzles and electrical contact on the printhead and replace the printhead in the printer.
[* black] Replace the ink cartridges in the printhead.
-[* black] If the printer requires a USB or Ethernet cable connection, plug the appropriate cable into the printer.
-[* black] Connect the printer to electric power. ***Do not do this until the print head is in place.***
+[* black] If the printer requires a USB or Ethernet cable connection, plug the appropriate cable into the printer. ***Reinstall the printhead before applying power to the printer.***
+[* black] Connect the printer to electric power.
[* black] Turn on the printer, and let it clean the head if it decides to run this procedure.
-[* black] Print a test page to determine whether the cleaning procedure worked. You may need to do a printhead initialization procedure, but following the bypass for this should prevent this.
-[* icon_reminder] If you still have trouble with the ink being clogged, try printing a print quality report to unclog the printhead further.
+[* black] Print a test page to determine whether the cleaning procedure worked. You may need to do a "first use" initialization, but following the bypass correctly should prevent this.
+[* icon_reminder] If you still have trouble with the ink being clogged, try printing a print quality report to unclog the printhead further. If this fails, do the cleaning a second time. If the second cleaning fails, the printhead is probably bad.