Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Cleaning the printhead
-[* black] Place the printhead in the bowl and allow it to soak. Allow time for the water to dissolve ink deposits in the printhead. If the head has a deep clog, use of an brush or alcohol will help it along. If you have an ultrasonic cleaner, you can use this mix to speed the process up. Use of distilled water is recommended, if possible.
-[* icon_reminder] Periodically move the print head in the bowl to help dissolve ink deposits and change the water as you go. Do this until the water is clear. ***Dry the head before you reinstall it in the printer, and if you want to do so let it sit near a warm spot to speed the drying process up.***
+[* black] Place the printhead in the bowl and allow it to soak. Allow time for the water to dissolve ink deposits in the printhead. If the head has a deep clog, use of a brush and alcohol will help. If you have an ultrasonic cleaner, you can use this mix to speed the process up. Use of distilled water is recommended, if possible.
+[* icon_reminder] Periodically move the print head in the bowl to help dissolve ink deposits and change the water as you go. Do this until the water is clear. ***Dry the head before you reinstall it in the printer, and if you want to do so let it sit near a warm spot to speed the drying process up. Since you did flush the ink, this should be fine.***