Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Nick-

Modifica approvata da Nick

Prima di
Dopo il
Invariato

Righe Passo

[title] Clean the printhead
-[* icon_caution] Alcohol should only be used as a last resort as it can damage the printhead. Purge the printhead ***''3 times''*** if alcohol is used.
+[* icon_caution] Alcohol should only be used as a last resort as it can damage the printhead. ***''Purge the printhead 3 times if alcohol is used.''***
[* icon_caution] ***''Recommended circulation times:''*** ***Alcohol:*** 5-10 minutes. ***Without alcohol:*** 15 minutes.
[* icon_reminder] The water will get lighter as the ink is cleared from the printhead. Change the water until it is clear. ***''For stubborn clogs, a ultrasonic cleaner or paintbrush can help break clogs down.''***
[* red] Pour hot water into a bowl and let the printhead sit. Change the water as it gets dark and unusable. Do this until the water is reasonably clear.
[* orange] To mitigate ***Printhead Problem*** errors, dry the contacts and nozzles by hand.
-[* yellow] Before reinstalling the printhead, let it dry for ~2-3 hours outside of the printer. Before reinstalling the printhead, let it dry for ~2-3 hours outside of the printer. ***Tip:*** Put the printhead in front of a fan to speed this up.
+[* yellow] Before reinstalling the printhead, let it dry for ~2-3 hours outside of the printer. ***Tip:*** Put the printhead in front of a fan to speed this up.