Modifiche al passo #8
Modifica in base a iRobot-
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Grasp the logic board at the left edge with one hand and at the thinnest section with the other hand. Lift the left edge of the board up to approximately a 30 degree angle (if you don't have your protractor handy, just lift until the DVI port clears the right hinge). |
| [* black] Once the logic board clears the ports, slide it out to the left. |
Immagine 1
Nessuna immagine precedente.
Aggiunto