Modifiche al passo #18
Modifica di Heather Fitzgerald —
Modifica approvata da Heather Fitzgerald
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Release the print heat conveyor | |
| - | [* |
| - | [* black] |
| + | [* red] Using the spudger, press the spring section of the white pulley. |
| + | [* black] While the spring is still compressed, release the conveyor from the pulley. |
| [* black] Remove the conveyor from the gear on the other side of the device. | |
| [* icon_note] Optional: Slide the conveyor off the print head. |