Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #4

Modifica in base a Philip Le Riche-

Modifica approvata da Philip Le Riche

Prima di
Dopo il
Invariato

Righe Passo

[* black] On the right side connection are made via a small printed circuit board. Remove 2 screws in order to remove this for re-soldering or replacement of any of the wires.
[*
icon_note] RED :On replacing this circuit board, take care to ensure that it's both the right way round and the right way up
[* icon_note] If you are replacing the main lead with the jack plug on the end, make sure that you have suitable strain relief to prevent the lead pulling on the soldered connections.
[* icon_note] The wire colours are:
[*
black] Right: Red
[* black] Left:
Green : left
[*

[*
black] Yellow : Ground for wire replacement (solder)Common (Ground): Gold.
[* black] On the right side connection are made via a small printed circuit board. Remove 2 screws in order to remove this for re-soldering or replacement of any of the wires.
[*
icon_note] RED :On replacing this circuit board, take care to ensure that it's both the right way round and the right way up
[* icon_note] If you are replacing the main lead with the jack plug on the end, make sure that you have suitable strain relief to prevent the lead pulling on the soldered connections.
[* icon_note] The wire colours are:
[*
black] Right: Red
[* black] Left:
Green : left
[*

[*
black] Yellow : Ground for wire replacement (solder)Common (Ground): Gold.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Eliminato