Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Brett Hartt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Insert a spudger in between the trigger and the trigger assembly on the left side of the trigger, prying the housing away from the catch on the trigger.
-[* black] In a similar manner, pry the trigger housing on the right side of the trigger away from the catch on that side.
+[* black] Insert the edge of a spudger in between the trigger and the trigger assembly near the left edge. Pry the housing away from the catch on the trigger.
+[* black] Using the previously described technique, pry the housing on the right edge away from the trigger.
[* black] Rotate the trigger away from the logic board, past its housing.