Modifiche al passo #4

Modifica in base a Heather Howard-

Modifica approvata da Heather Howard

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pull the imaging unit out of the printer using bottom handle.
[* black] Use green handle on top of imaging unit to steady unit as you pull it out.
[* black] Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
[* icon_note] Note: Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit
[* icon_caution] Caution: Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.
[* icon_caution] Caution: If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.
[* icon_note] Note: Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit
[* icon_caution] Caution: Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.
[* icon_caution] Caution: If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.