Modifiche al passo #2
Righe Passo
| [* black] Remove the battery door. | |
| [* black] Open the battery door to about a 35° angle. | |
| [* red] Pull the battery door straight outwards. | |
| [* black] Remove the following screws from the bottom of the camera: | |
| - | [* orange] One M1.7x6.0mm JIS |
| - | [* yellow] Two M1.7x2.5mm JIS |
| - | [* green] One M1.7x5.5mm JIS |
| + | [* orange] One M1.7x6.0mm JIS #000 screw |
| + | [* yellow] Two M1.7x2.5mm JIS #000 screws |
| + | [* green] One M1.7x5.5mm JIS #000 screw |