Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Modifiche al passo #3

Modifica in base a Adriana Rahrig-

Modifica approvata da Geoff Wacker

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Withtitle] Open the Time Capsule
[* icon_reminder] Position
the rear side of the device (the side with Ethernet connectors) so that it is facing you, carefully liftyou.
[* black] Lift
up the left side of the metal plate while keepingand slowly flip it over the right sideedge of the device.
[* icon_caution] To prevent damage, do not lift the metal
plate nearstraight up or use force. As shown in the top portion ofsecond picture, the unit.
[* icon_caution] The
fan is attached to the metal plate,plate and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* red] Disconnect the fan from the logic board. Aboard using a spudger or tweezers may make it easier to do thistweezers.
[* black] Withtitle] Open the Time Capsule
[* icon_reminder] Position
the rear side of the device (the side with Ethernet connectors) so that it is facing you, carefully liftyou.
[* black] Lift
up the left side of the metal plate while keepingand slowly flip it over the right sideedge of the device.
[* icon_caution] To prevent damage, do not lift the metal
plate nearstraight up or use force. As shown in the top portion ofsecond picture, the unit.
[* icon_caution] The
fan is attached to the metal plate,plate and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* red] Disconnect the fan from the logic board. Aboard using a spudger or tweezers may make it easier to do thistweezers.