Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a John Bayley-

Modifica rifiutata da Ryan Lutz

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] With the rear side of the device (the side with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* icon_caution] The fan is attached to the metal plate, and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the connectorconnector.However see if you can carefully lay the metal plate beside the box first as sometimes the fan cables are long enough.
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the connectorconnector.However see if you can carefully lay the metal plate beside the box first as sometimes the fan cables are long enough.