Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a Justin Rusk-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] With the rear side of the device (with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* icon_caution] The fan is attached to the metal plate, and connected to the motherboardlogic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the motherboardlogic board using a spudger or tweezers to pry the cable out of the connector.
[* icon_caution] The fan is attached to the metal plate, and connected to the motherboardlogic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the motherboardlogic board using a spudger or tweezers to pry the cable out of the connector.