Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Modifiche al passo #3

Modifica in base a Nick-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] With the rear side of the device (with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* icon_caution] The fan is attached to the metal plate, and connected to the motherboard next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] If necessary, disconnect the fan from the motherboard using a spudger or tweezers to pry the cable out of the connector.
[* icon_note] Unless you are replacing or working on the fan, you may not need to disconnect it; if you leave it connected, take care to support the metal plate to prevent it from pulling on the wires while you are workingworking but you should unplug it to be on the safe side.
[* icon_note] Unless you are replacing or working on the fan, you may not need to disconnect it; if you leave it connected, take care to support the metal plate to prevent it from pulling on the wires while you are workingworking but you should unplug it to be on the safe side.