Modifiche al passo #5
Righe Passo
| [title] Soldering the Wires | |
| - | [* black] Heat the soldering |
| + | [* black] Heat the soldering iron for approximately five minutes, or until it has reached a sufficient temperature. |
| [* black] Connect both ends of a wire that was originally cut and apply the soldering wire to this region. | |
| - | [* black] Position the heated soldering |
| + | [* black] Position the heated soldering iron in contact with the soldering wire. This will heat the wire to a melted state in order to solder the original wires together. |
| [* black] Complete this action for all of the wires cut in Step 3. | |
| - | [* icon_caution] Exercise caution when using the soldering |
| + | [* icon_caution] Exercise caution when using the soldering iron and soldering wire because it can reach extremely high temperatures. |