Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a David Platt-

Modifica approvata da David Platt

Prima di
Dopo il
Invariato

Righe Passo

[* red] Unscrew twoTwo Phillips screws usingneed to be removed using a #00 Phillips screwdriver. The upper screw is under the USB port cover is .125 inches, whilecover, which can simply be pulled away gently from the casing. the lower screw is .085 inchesvisible on the panel.
[* orange] The screws are different sizes. The .125 inch screw is located under the USB port cover. The 0.85 inch screw goes in the lower hole on the panel
.
[* red] Unscrew twoTwo Phillips screws usingneed to be removed using a #00 Phillips screwdriver. The upper screw is under the USB port cover is .125 inches, whilecover, which can simply be pulled away gently from the casing. the lower screw is .085 inchesvisible on the panel.
[* orange] The screws are different sizes. The .125 inch screw is located under the USB port cover. The 0.85 inch screw goes in the lower hole on the panel
.
[* icon_note] When looking at the back of the camera, these two screws are on the right panel of the camera.

Immagine 2

Vecchia Versione

Nuova Versione