Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] After the logic board assembly is out, the reset and power button covers can easily be removed.
[* black] Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.
[* icon_note] Ejecting a cartridge is accomplished by pushing antwo inclined planeplanes underneath the cartridge until it pops up off the connector attached to the board.
[* icon_note] Ejecting a cartridge is accomplished by pushing antwo inclined planeplanes underneath the cartridge until it pops up off the connector attached to the board.