Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Brett Hartt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a metal spudger between the fan vent and top bezel along the left side of the Xbox, where the next clip is locatedconsole.
[* black] UseIn the same methodmanner described above to freeabove, begin prying the left side of the top vent away from the top bezel.
[* black] Continue prying along the left side of the device, freeing all
the clipclips on that side.
[* black] Insert a metal spudger between the fan vent and top bezel along the left side of the Xbox, where the next clip is locatedconsole.
[* black] UseIn the same methodmanner described above to freeabove, begin prying the left side of the top vent away from the top bezel.
[* black] Continue prying along the left side of the device, freeing all
the clipclips on that side.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto