Modifiche al passo #1
Modifica di Tim Murphy —
Modifica approvata da Tim Murphy
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Removing Screws | |
| [* icon_caution] Make sure the safety is on! | |
| [* black] Place the carbine with the saddle ring and leather thong facing upwards. | |
| [* red] Locate the screw head on the cocking lever. | |
| [* icon_note] There should be one on either side of the saddle ring and one on the cocking lever assembly. | |
| [* black] Place a #2 Phillips Screwdriver in the 11/16ths of an inch, matte black screw on the cocking lever assembly. Twist with a counter-clockwise motion. | |
| [* black] Completely remove the screws. | |
| - | [* icon_caution] Be wary of the black washers on the other side of the Carbine. |
| + | [* icon_caution] Be wary of the black washers on the other side of the Carbine. Be sure to keep track of them once they fall out after the screws are removed |