Salta al contenuto principale

Modifiche al passo #2

Modifica in base a redacted-

Modifica approvata da redacted

Prima di
Dopo il
Invariato

Righe Passo

-[title] Twist the foam pad, clockwise
-[* black] Once you have matched up the grooves on the foam pads with the speakers, twist them clockwise until they tightly fit over the speaker.
+[title] Unscrew the speakers from the housing
+[* black] There should be approximately three screws holding the right speaker. Unscrew them to gain access to the wiring of the speakers.
+[* black] Keep the screws in a safe place. They are small and can easily be lost.