Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Andrew Barbanera-

Modifica approvata da Andrew Barbanera

Eliminato
Aggiunto
Invariato

Righe Passo

[title] Removing Logic Board
[* black] UnderlayingThe large board under everything is the logic boardboard.
[* black] Removing this requires unscrewing 6 screwsscrews, 2 7.3mm T5 Torx and 4 8.4mm T5 Torx located around the edges of the logic board. Whichboard, which should have already been taken out when removing the fan.
[* black] UnderlayingThe large board under everything is the logic boardboard.
[* black] Removing this requires unscrewing 6 screwsscrews, 2 7.3mm T5 Torx and 4 8.4mm T5 Torx located around the edges of the logic board. Whichboard, which should have already been taken out when removing the fan.
[* black] Once all the screws are gone, be careful with the ports on top of the logic board. Gently wiggling helps.