Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Stan Searing-

Modifica approvata da Aiden

Prima di
Dopo il
Invariato

Righe Passo

[title] Remove Circuit Board
[* black] Grab the four wires from the circuit board.
[* black] Tilt the board back to remove it.
+[* black] If the board won't come out with some wiggling, you may need to loosen the two screws at the top of the control plate. Mark the top of the heads and loosen them 5 complete turns. You may need to loosen the locking nuts.