Salta al contenuto principale

Modifiche al passo #14

Modifica in base a Walter Galan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the following screws:
[* red] Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.
[* orange] Two 8 mm PhillipsT6 Torx screws securing the DC-In board to the upper case.
[* orange] Two 8 mm PhillipsT6 Torx screws securing the DC-In board to the upper case.
[* icon_caution] Do not remove the logic board yet! There are components on the underside of the logic board attached to the the upper case that must first be disconnected.