Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Cyrille-

Modifica rifiutata da Adam O'Camb

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] Grab the plastic pull tab secured to the display data cable lock and rotate it toward(the small one on the DC-Infan side of the computerconnection) and lift it away from the surface.
[* green] This metal bracket that you lifted can now be used to pull the cable out
.
[* black] PullUsing this metal bracket, pull the display data cable straighttowards the corner and out of its socket.
[* blackred] Grab the plastic pull tab secured to the display data cable lock and rotate it toward(the small one on the DC-Infan side of the computerconnection) and lift it away from the surface.
[* green] This metal bracket that you lifted can now be used to pull the cable out
.
[* black] PullUsing this metal bracket, pull the display data cable straighttowards the corner and out of its socket.
[* icon_caution] Do not pull the cable upward, as the socket is very fragile. Pull the cable parallel to the face of the logic board toward the corner of the upper case.

Immagine 2

Vecchia Versione

Nuova Versione