Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Cut the wire of the magsafe some distance back from the manetic end. I used about 4 inches but in reality you can get much closer like maybe an inch, as you will see in the next step.
+[* black] Use wire cutters to cut the wire of the magsafe some distance back from the manetic end. I used about 4 inches but in reality you can get much closer like maybe an inch, as you will see in the next step.