Salta al contenuto principale

Modifiche al passo #3

Modifica in base a gatortpk-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.
[* black] Lift the clutch cover out of the display assembly.
[* icon_reminder] During reassembly, make sure not to pinch the pink and white inverterbacklight cable (with the white connector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)
[* icon_reminder] During reassembly, make sure not to pinch the pink and white inverterbacklight cable (with the white connector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)