Salta al contenuto principale

Modifiche al passo #5

Modifica in base a David Hodson-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Remove three 3.8 mm T5 Torx screws securing the logic board to the front case.
-[* icon_caution] Don't attempt to remove the logic board yet, it is still attached by the keypad ribbon connector.
+[* red] Remove three 3.8 mm T5 Torx screws securing the motherboard to the front case.
+[* icon_caution] Don't attempt to remove the motherboard yet, it is still attached by the keypad ribbon connector.