Salta al contenuto principale

Modifiche al passo #2

Modifica in base a David Hodson-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Peel off the black tape covering the side button and keypad connectors on the logic board.
+[* red] Peel off the black tape covering the side button and display ribbon connectors on the logic board.
[* orange] Use the flat end of a spudger to disconnect the power button/volume button connector by lifting it off its socket on the logic board.
-[* yellow] Use the method described above to remove the keypad connector.
+[* yellow] Use the method described above to remove the display ribbon connector.