Salta al contenuto principale

Modifiche al passo #2

Modifica in base a David Hodson-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Peel off the black tape covering the side button and screen connectors on the logic board.
-[* black] Disconnect both connectors by prying straight up from their sockets on the logic board.
+[* red] Peel off the black tape covering the side button and keypad connectors on the logic board.
+[* orange] Use the flat end of a spudger to disconnect the power button/volume button connector by lifting it off its socket on the logic board.
+[* yellow] Use the method described above to remove the keypad connector.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione