Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Brett Hartt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Disconnect the speaker cable from its socket on the speaker board prying they straight up from the board with a spudger.
[* black] Disconnect the speaker cable from its socket on the logic board as done above.
+[* red] Remove the speaker cable by pulling it horizontally out of the clips holding it in.

Immagine 3

Nessuna immagine precedente.

Aggiunto