Salta al contenuto principale

Modifiche al passo #5

Modifica in base a [deleted]-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Now just take the poti out, take the wires and... Oh, where is the green cable the instruction from EMG told us from? In fact, it is missing...
[* black] But that doesn't matter, just take any cable you can find, and act like it was the green cable, because this is the only cable that doesn't have a special connector like the others.
[* black] Well, it's not only the green cable that is missing, but the second cable one has to pull through the outputjack hole is too short... And again, that doesn't matter, just cut that cable in the center, take another "any-cable"the old ouputcable that was in the guitar anyway and solder it, and there it is, the long-enough cable for the outputjack.
[* black] Well, it's not only the green cable that is missing, but the second cable one has to pull through the outputjack hole is too short... And again, that doesn't matter, just cut that cable in the center, take another "any-cable"the old ouputcable that was in the guitar anyway and solder it, and there it is, the long-enough cable for the outputjack.
[* black] I just isolated the solderconnections with adhesive tape.