Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Brian Marchini-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Lay the laptop on a flat surface with the bottom facing up.
[* red]
The RAM is covered by the panel with four columns of vents.
[* blackyellow] Locate the screw (Length: 4.8 mm) holding down the panel, near the edge of the laptop, and remove it.
[* black] Lay the laptop on a flat surface with the bottom facing up.
[* red]
The RAM is covered by the panel with four columns of vents.
[* blackyellow] Locate the screw (Length: 4.8 mm) holding down the panel, near the edge of the laptop, and remove it.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto