Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #2

Modifica in base a mpardus-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes. Be sure to reinstall screws into the bottom holes. (bracket screws go into holes above later)
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes. Be sure to reinstall screws into the bottom holes. (bracket screws go into holes above later)