Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #2

Modifica in base a filchambers-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] TwoOne 3 mm Phillips #000.
[* orange] OneTwo 4 mm Phillips #000 on the right side.
[* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* red] TwoOne 3 mm Phillips #000.
[* orange] OneTwo 4 mm Phillips #000 on the right side.
[* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.