Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a David Laffie-

In attesa di approvazione


Righe Passo

[* black] Grasp the white plastic tab attached to the hard drive and pull it to the right, removing the hard drive from the computer.
[* icon_reminder] The hard drive goes back into its compartment with the label facing down.
[* black] NOTE: When putting the new drive back into the slot, be sure to check the rubber rails on each side. (Use a flashlight to look into the HD compartment.) If one or both are loose or have come away from the metal sides, it will be necessary to secure them before proceeding. Secure with silicone caulk (small amount!). To get into compartment see "Hard Drive Connector" Guide. Replacements for damaged rails can be found at